 |

|
SS-1D

|
SU-6D

|
| | Electrical specifications
Model |
SS-1D |
SU-6D
|
Operating frequency band, MHz |
1880-1900 |
1880-1900
|
Gain,dBi |
1 |
5.5
|
VSWR, not more than |
1.5 |
1.5
|
Polarization |
vertical
|
Front-to-back ratio, dB |
present |
15
|
Max. power input, W |
10 |
10
|
Sector in H-plane (-3 dB) |
360В° |
90В°
|
Sector in E-plane (-3 dB) |
100В° |
52В°
|
Impedance, Ohm |
50 |
50
|
|
|
Mechanical specifications
Model |
SS-1D |
SU-6D
|
Dimensions (LxWxH), mm |
172x172x68 |
102x42x133
|
Weight, kg |
0.08 |
0.25
|
Rated wind velocity, m/s |
no data |
55
|
Radiator |
PCB |
copper
|
Radome |
Polystyrene white |
ABS
|
Connector |
N-female |
TNC (N-fem, SMA - optional)
|
Mounting |
On a ceiling |
On a wall
|
Additional complete set |
- |
low loss cable 2.5 m
|
| |
For creation of the inside-the-office or the inside-the-premises local DECT network these model would be very suitable. The antenna SS-1D is mounted on the ceiling and provides a circular radiation pattern, while the antenna SU-6D being fixed at any horizontal and vertical plane ensures the directional radiation of SHF power. Thus by means of using these antennas as well as the system of their feeding by the directed dividers of our production you will be able to construct an efficient inside-the-office communications system.
SS-1D E-plane pattern

|
SS-6D E-plane pattern

|
SU-6D H-plane pattern

|
|
The information provided on this page is not an official offer. To verify actual parameters contact the sales department before ordering.
|
|