 |

|
DECT A-5D

|
DECT A-3D

|
DECT A-8D

|
| | Electrical specifications
Model |
A-3D |
A-5D |
A-8D
|
Operating Frequency band, MHz |
1880-1900 |
1880-1900 |
1880-1900
|
Gain,dBi |
3 |
5.2 |
8
|
VSWR, not more than |
1.5 |
1.5 |
1.5
|
Polarization |
vertical |
vertical |
vertical
|
Electrical downtill |
0° |
0° |
3°
|
Max. power input, W |
10 |
10 |
10
|
Sector in H-plane (-3 dB) |
360°
|
Sector in E-plane (-3 dB) |
56° |
22° |
10°
|
Impedance, Ohm |
50 |
50 |
50
|
|
|
Mechanical specifications
Model |
A-3D |
A-5D |
A-8D
|
Dimensions (LxWxH), mm |
35x35x332 |
35x35x527 |
35x35x1131
|
Weight, kg |
0.22 |
0.300 |
0.600
|
Rated Wind Velocity, m/s |
50 |
55 |
40
|
Radiator |
copper |
copper |
copper
|
Radome |
grey PVC |
grey PVC |
grey PVC
|
Mounting kit |
on a mast/wall
|
Connector |
N-female |
N-female |
N-female
|
| |
These antennas are characterized by an ideally circular radiation pattern in horizontal plane and a gain coefficients of 3, 5,2 and 8 dBi correspondingly. The antenna A-3D is recommended to be applied as an inside-the-office antenna, while the rest of antennas - as the base antennas. The model A-8D has an increased gain and a tilt of the radiation pattern in a vertical plane what provides a maximum efficiency at receiving and transmitting the SHF power near the earth surface, where the subscribers are positioned.
A-3D E-plane pattern

A-5D E-plane pattern

|
A-8D E-plane pattern

|
|
|
The information provided on this page is not an official offer. To verify actual parameters contact the sales department before ordering.
|
|