 |
 
|
 | Electrical specifications
| Model |
RAX-14D-70
|
| Operating Frequency band, MHz |
1710-1900
|
| Gain,dBi |
14
|
| VSWR, not more than |
1.5
|
| Front-to back ratio, dB |
20
|
| Polarization |
± 45°
|
| Isolation, dB |
-20
|
| Electrical downtilt |
0°
|
| Max. power input, W |
10
|
| Sector in horizontal plane |
70°
|
| Sector in vertical plane |
17°
|
Mechanical specifications
| Model |
RAX-14D-70
|
| Dimensions (LxWxH), mm |
204x63x518
|
| Weight, kg |
2
|
| Rated Wind Velocity, m/s |
50
|
| Radiator |
copper
|
| Radome |
grey, ABS
|
| Mounting |
on a mast (30-220 M) with "Norma" or CP-55D, CP-115, CP-220
|
| Connector |
N-female on a cable
|
| |
Specially for the DECT standard an antenna RAX-14D-70 with the inclined polarization has been developed for the implementation of the spaced receiving technique. This panel consists of two independent antennas of polarization ± 45°, the gain of 14 dBi and the outputs separation not less than 30 dB. The irradiation sector by the level of a half power value is about 70°. For the adjustment of the radiation pattern in a vertical plane we suggest to use the tilt mechanism MN-1.
RAX-14D-70 in horizontal plane
RAX-14D-70 in vertical plane
|
|
The information provided on this page is not an official offer.
To verify actual parameters contact the sales department before ordering.
|
|
