LLC
Russian versionVersion for print
  • 140-174 MHz
    Bandpass filters PF5-1V, PF5-2V, PF5-3V

    Please visit our partner in EU
    Internet shop www.duplexers.eu
    Catalog www.ik-telecom.com

    PF5-1V

    PF5-2V

    PF5-3V

    Electrical specifications

    Model PF5-1V PF5-2V PF5-3V
    Operating frequency band, MHz 140-174
    Insertion loss (adjustable), dB 0,5-3 1-5 1,5-6
    Impedance, Ohm 50
    Attenuation see fig.
    VSWR, not more than 1,2
    Input power, not more, W not more than 300
    Temperature range, В°C from -30 to +60
    Cavity electrical length 1/4О»

    Mechanical specifications

    Model PF5-1V PF5-2V PF5-3V
    Diameter, mm (ins.) 128 (5")
    Weight, kg 1,85 4,4 6,25
    Connector N-female
    Mount to 19-inch rack optional yes
    Dimensions (LxWxH), mm 128x128x800 480x140x800

    Using PF5-V filters in antenna section of radio stations and repeaters you will raise selectivity of their receivers, lower influence of out-of-band interference, escape effect of UHF blanking by nearby radio transmitters and desensitization, and eliminate intemodulation interference, also.

    Filters, installed in transmitters circuit, lower stray emission level and prevent intermodulation products occurrence. Recommended to use if equipment is installed in locations with high density of transmitting devices.

    PF5-2V and PF5-3V filter represents two and three PF5-1V filters connected in series and combined by metal brackets. They have higher characteristics at corresponding loss.


    Typical selectivity characteristics

    PF5-1V

    PF5-2V

    PF5-3V

    The information provided on this page is not an official offer.
    To verify actual parameters contact the sales department before ordering.