 |
 
|
ARP-2
ARP-4
| | Electrical specifications
| Model |
ARP-2 |
ARP-4 |
ARP-8
|
| Operating frequency band, MHz |
118-500 |
118-500 |
118-500
|
| Number of outputs |
2 |
4 |
8
|
| Min. level of isolation, dB |
25 |
22 |
18
|
| Typical level of isolation, not less, dB |
30 |
30 |
22
|
| VSWR, not more than |
1,5 |
1.5 |
1.5
|
| Amplifier gain, dB |
0 to +12 |
0 to +9 |
0 to +6
|
| Impedance, Ohm |
50 |
50 |
50
|
| 1 dB compression point, dBm |
22.3 |
22.3 |
22.3
|
| Voltage, V |
5-14 |
5-14 |
5-14
|
| Current, mA |
120 |
120 |
120
|
|
|
Mechanical specifications
| Model |
ARP-2 |
ARP-4 |
ARP-8
|
| Weight, kg |
0,78 |
0.8 |
|
| Demensions, mm |
485Ñ…160Ñ…44(1U) |
485Ñ…160Ñ…44(1U) |
485Ñ…160Ñ…88(2U)
|
| Temperature range, °C |
from -30 to +50
|
| Connectors |
N-female
|
| |
Active reiciver power splitters are used in multichannel mobile radio systems to connect multiple receivers to one common antenna. They are a combination of a low-noise amplifier with variable gain and a wide-band distribution panel for 2, 4 or 8 channels.
A feature of the product is a wide operating range and isolation in the entire operating frequency band between the input ports of the receivers, which is necessary to prevent intermodulation beats between them, and the overall size of 1 or 2U saves rack space.
Spear port should be "pegged" by 50-Ohm load NC-0.2 to provide circuit balance, when only three receivers are operating.
Typical isolation ARP-4
|
Typical gain ARP-4
|
|
|
The information provided on this page is not an official offer.
To verify actual parameters contact the sales department before ordering.
|
|
