 |
 
|
 | | Electrical specifications
| Model |
MDF2-6V2/4.5 |
MDF2-6V1/2 |
MDF2-6V(M)2/4.5
|
| Operating frequency band, MHz |
146-156 |
146-156 |
152-174
|
| Insertion loss (adjustable) not more, dB |
0.8 |
1.5 |
1.0
|
| Frequency separation TX/RX (min), MHz |
2 - 4.5 |
1 - 2 |
2 - 4.5
|
| Impedance, Ohm |
50 |
50 |
50
|
| Isolation, not less, dB |
80 |
80 |
80
|
| VSWR, not more than |
1.5 |
1.5 |
1.5
|
| Input power, not more, W |
not more than 100
|
| Temperature range, В°C |
from -5 to +40
|
|
|
Mechanical specifications
| Model |
MDF2-6V2/4.5 |
MDF2-6V1/2 |
MDF2-6V(M)2/4.5
|
| Weight, kg |
8.7
|
| Connector |
N-female
|
| Dimensions (LxWxH), mm |
310x53x610
|
| |
A new models MDF2-6V2/4.5, MDF2-6V1/2, MDF2-6V(M)2/4.5 is a prototype of MDF-6V, but is performed on the basis of the usual linear (not spiral) cavities in the cases of the 50 mm cross-section. As a result an enhanced quality-factor helps to decrease the separation TX/RX to the value of 2-3 MHz or 1 MHz and to increase the filtering capabilities of the duplexer.
Typical duplexers response curves
MDF2-6V2/4.5
MDF2-6V1/2
|
|
The information provided on this page is not an official offer.
To verify actual parameters contact the sales department before ordering.
|
|
