 |
 
|
MDF2-6U-10HP
 | | Electrical specifications
| Model |
MDF2-6U-10HP
|
| Operating frequency band, MHz |
400-470
|
| Insertion loss (adjustable) not more, dB |
0.8
|
| Frequency separation TX/RX (min), MHz |
8-13
|
| Impedance, Ohm |
50
|
| Isolation, not less, dB |
85
|
| VSWR, not more than |
1.5
|
| Input power, not more, W |
not more than 150
|
| Temperature range, В°C |
from -30 to +50
|
|
|
Mechanical specifications
| Model |
MDF2-6U-10HP
|
| Weight, kg |
3.1
|
| Connector |
N-female
|
| Dimensions (LxWxH), mm |
302x332x65
|
| |
Duplexers are used in the civil radio (trunking), they are provides simultaneous operation the mobile station to transmit and receive on one antenna in the range of 440-470 MHz. However, these duplexers are ineffective, when implemented in base stations and a place with questionable electromagnetic environment.
Model on 2 inch resonator is designed for the power for up to 150 watts.
Typical duplexers response curves MDF2-6U-10HP
 |
|
The information provided on this page is not an official offer.
To verify actual parameters contact the sales department before ordering.
|
|
