 |
 
|
Print pages (PDF 57Kb)
 | | Electrical specifications
| Model |
F2 VHF (L) |
F2 VHF(LM) |
F2 VHF (M) |
F2 VHF (H)
|
| Operating frequency band, MHz |
141-153 |
146-158 |
154-165 |
163-174
|
| VSWR, not more than |
1.5
|
| Gain,dBi |
5.15
|
Sector
in vertical plane , -3dB |
38В°
|
| Impedance, Ohm |
50
|
| Max. power input, W |
400
|
| Lightning protection |
yes
|
| Adjustable |
no need
|
|
|
Mechanical specifications
| Model |
F2 VHF (L) |
F2 VHF(LM) |
F2 VHF (M) |
F2 VHF (H)
|
| Weight, kg |
3.15
|
| Height/Length, mm |
3160
|
| Mast diametr, mm |
50-110
|
| Radome |
fiberglass
|
| Rated wind velocity, m/s |
40
|
| Wind loading area, m2 |
0.16
|
| Load of side wind 40 m/s, H |
180
|
| Temperature range, В°C |
from -50 to +50
|
| Connector |
N-female, (7/16 DIN-optional)
|
| |
Antenna F2 VHF is used in telecommunications systems, which are required to provide operation in satisfactory wide bandwidth at omni directional pattern. This antenna will be irreplaceable for operation of single-feeder design trunking and conventional repeaters.
Radioparent, weatherproof, high-strength radome is made using fiberglass material on polyester binding substances. The radome has polyurethane coating protecting from ultraviolet radiation and icing.
Antenna has protection from lightning and does not demand additional adjustment.
VSWR diagram, F2 VHF(L), F2 VHF(LM)
|
VSWR diagram, F2 VHF(M), F2 VHF(H)
.gif)
|
F2 VHF (L, M, H) E-plane pattern
|
|
The information provided on this page is not an official offer.
To verify actual parameters contact the sales department before ordering.
|
|
