 |
 
|
SS-1W
|
SU-6W
|
| | Electrical specifications
| Model |
SS-1W |
SS-6W
|
| Operating frequency band, MHz |
2400-2485 |
2400-2485
|
| Gain,dBi |
1 |
5.5
|
| VSWR, not more than |
1.5 |
1.5
|
| Front-to-back ratio, dB |
present |
20
|
| Polarization |
vertical
|
| Max. power input, W |
10 |
10
|
| Sector in H-plane (-3 dB) |
360В° |
78В°
|
| Sector in E-plane (-3 dB) |
100В° |
42В°
|
| Impedance, Ohm |
50 |
50
|
|
|
Mechanical specifications
| Model |
SS-1W |
SU-6W
|
| Dimensions (LxWxH), mm |
172x172x68 |
102x42x133
|
| Weight, kg |
0.08 |
0.25
|
| Rated wind velocity, m/s |
no data |
55
|
| Radiator |
PCB |
copper
|
| Radome |
Polystyrene white |
ABS
|
| Mounting |
On a ceiling |
On a wall
|
| Connector |
R-SMA (R-TNC, N-female, TNC, SMA - optional)
|
| Additional complete set |
- |
low loss cable 2.5 m
|
| |
To construct an inside-the-office network WLAN these models would be very suitable. An antenna SS-1W is mounted on the ceiling and provides a circular radiation pattern, and antenna SU-6W, while being mounted at any horizontal and vertical plane, provides a directional radiation of the SHF energy. An antenna SU-6W is supplied with a sufficiently long feeding cable (2,5 m) which is ended by a connector that is necessary for switching directly to the corresponding equipment. That`s why the necessity in additional cables and transmit elements is eliminated.
SS-1W E-plane pattern
|
SU-6W E-plane pattern
|
SU-6W H-plane pattern
|
|
The information provided on this page is not an official offer.
To verify actual parameters contact the sales department before ordering.
|
|
