 |
 
|
| | Electrical specifications
| Model |
LA-400-430
|
| Operating frequency band, MHz |
400-430
|
| Frequency bandwidth, MHz |
30
|
| VSWR, not more than |
1.5
|
| Gain OFFSET, dBd |
0
|
| Sector in vertical plane, -3dB |
65°
|
| Impedance, Ohm |
50
|
| Max. power input, W |
100
|
| Grounding |
DC grounded
|
|
|
Mechanical specifications
| Model |
LA-400-430
|
| Weight, kg |
0.715
|
| Height/Length, mm |
80
|
| Construction material |
Aluminium alloy
|
| Radome |
ABS
|
| Standard mounting |
horizontal metal plane
|
| Rated wind velocity, m/s |
55
|
| Wind loading area, m2 |
0,008
|
| Rated wind velocity with 0.5" icing, m/s |
42
|
| Temperature range, °C |
from -50 to +50
|
| Connector |
N-female
|
| |
Locomotive antennas of the "LA" series are designed for communication systems on railway transport. Due to its design the antenna can also be used on other kinds of vehicles as well as on fixed sites. TETRA equipment operating in the 400-430 MHz band and data transmission systems may use these mobile antennas.
The new wideband LA-400-430 model covers the whole 400-430 MHz band with VSWR not worse than 1.5 without any additional tuning.
The "LA" models have a low profile design, their height does not exceed 80 mm, and they are protected by a strong ABS plastic radome. This provides better aerodynamics and additional electrical safety. The construction is DC grounded.
The antenna is mounted on the metal roof of the locomotive with M6 bolts, the cable goes through a hole in the roof.
IMPORTANT! The antenna parameters are guaranteed when it is mounted on a metal plane of at least 1x1 meter.
Typical VSWR diagram, 400-430 MHz
|
Typical VSWR diagram, 430-470 MHz
|
LA-400-430 H-plane pattern
|
LA-400-430 E-plane pattern
|
|
|
The information provided on this page is not an official offer.
To verify actual parameters contact the sales department before ordering.
|
|
