GSM 860-970/1710-1900 MHz Subscribers' antennas SS-3GL, SU-6GL, SU-6GH

radial@radial.ru
www.radial.ru

Please visit our partner in EU
Internet shop www.duplexers.eu
Catalog www.ik-telecom.com

SU-6GL

SU-6GH

SS-3GL

Electrical specifications

Model SS-3GL SU-6GL SU-6GH
Operating frequency band, Mhz 860-970 860-970 1710-1900
Gain,dBi 3 5.5 5,5
VSWR, not more than 1.5 1.5 1.5
Front-to-back ratio, dB present 15 15
Polarization vertical
Max. power input, W
50 50 50
H-plane beamwidth 360° 86° 86°
E-plane beamwidth 100° 55° 55°
Impedance, Ohm 50 50 50

Mechanical specifications

Model SS-3GL SU-6GL SU-6GH
Dimensions (LxWxH), mm 250x250x90 195x50x265 195x50x265
Weight, kg 0.25 0.85 0.8
Rated wind velocity, m/s no data 55 55
Radiator copper copper copper
Radome Polystyrene white grey ABS grey ABS
Mounting On a ceiling On a wall
Connector N-female N-female on a cable (SMA, TNC - optional)

This small subscriber`s antenna - SU-6G, will help to increase significantly the quality of the mobile cellular telephone operation. It will also ensures a reliable operation of the GSM repeater for improving the cellular coverage inside the premises: big iron-concrete buildings, the premises below the earth level, etc. The antennas are suitably mounted on the pipe-mast, on the wall, on the horizontal surface by means of an additional wall bracket. For the direct switching to the cellular telephone it is necessary to make an additional order for the feeder of the needed length and for a jumper.
To create a distributed antenna network of the repeaters in GSM-900 the antennas of the ceiling mounting - SS-3GL - are often used. They are mounted on the ceiling panels and are switched to the feeder network through the power dividers.

SS-3GL E-plane pattern

SU-6G E-plane pattern

SU-6G H-plane pattern


The information provided on this page is not an official offer.
To verify actual parameters contact the sales department before ordering.