30-50 MHz Dipole antennas DP1 LB, DP2 LB


Please visit our partner in EU
Internet shop www.duplexers.eu
Catalog www.ik-telecom.com

30-50 MHz  Dipole antennas DP1 LB, DP2 LB

Electrical specifications

Model DP1 LB(L)/(M)/(H) DP2 LB(L)/(M)/(H)
Operating frequency band, MHz 33-40 (L) 33-40 (L)
37-45 (M) 37-45 (M)
40-50 (H) 40-50 (H)
Frequency bandwidth, MHz 2 2
VSWR, not more than 1.5 1.5
Gain,dBi 5.15 8.15
Sector in vertical plane , -3dB 70° 35°
Impedance, Ohm 50 50
Max. power input, W 500 800
Adjustable needed needed

Mechanical specifications

Model DP1 LB(L)/(M)/(H) DP2 LB(L)/(M)/(H)
Weight, kg 6 13
Height/Length, M 2.7-4.5 8.2-10.8
Construction material Aluminium alloy Aluminium alloy
Mast diametr, mm 38-65 38-65
Rated wind velocity, m/s 42 42
Wind loading area, m2 0,16 0.33
Load of side wind 45 m/s, H 187 374
Rated wind velocity with 0.5" icing, m/s 28 28
Temperature range, °C from -50 to +50 from -50 to +50
Connector N-female N-female

Antenna DP1 LB is highly effective as a component for trunking and common repeaters with significant (up to 4 MHz) TX/RX separation. It is very handy for adjustment and installation due to its design. In spite of its dimensions antenna has high mechanical strength, provided by additional mounting brackets. You can refuse removing transmitter for a long distance from mast as an advantage of antenna power supply system. Antenna DP2 LB is two-level collinear antenna with high gain factor. Only girder masts suit for its installation. Dipoles, mounted on opposites sides of the antenna, provide possibility to produce practically circular directional pattern (with some loss of the gain). Antenna has wide operating bandwidth, as single-dipole antenna does. Equipped with TK-52LB adders.

DP1 LB E-plane pattern

DP2 LB E-plane pattern

DP1 LB and DP2 LB H-plane pattern

VSWR diagram, DP1 LB

VSWR diagram, DP2 LB

The information provided on this page is not an official offer.
To verify actual parameters contact the sales department before ordering.