1-30 MHz Baluns BR-800-1(2.5/4/6/11/16) : Radial :

Electrical specifications

Model	Balun
Operating frequency band, MHz	1-30
Impedance ratio
BR-800-1	1:1
BR-800-2.5	1:2.5
BR-800-4	1:4
BR-800-6	1:6
BR-800-9	1:9
BR-800-11	1:11
BR-800-16	1:16
Insertion loss, dB	0.2-0.4
Input power, not more, W	800
Connector	SO-239
Weight, kg	386
Length/Width/Depth, mm	118х100х60
Impedance, Ohm	50
* The antenna power capacity is defined by the duration of transmission, type of transmission, its frequency, SWR and the ambient temperature.

Balun is designed for the transformation of antenna high resistance to standard impedance of 50 Ohm with simultaneous current symmetry. This unit is used to ensure the predictive antenna directivity diagram, eliminating the cable radiation, that in turn reduces the interference level. In the receive mode the balun eliminates «antenna effect» of the cable and significantly reduces the consumer interference level. Balancing transformer (balun) is equipped with ferrite “binoculars”. The balun is thoroughly protected against moisture due to the polyether sealing. The fiberglass cover protects against the direct moisture penetration as well. The hole located at the bottom of the balun close to the connector ensures the condensation drain and blowing of internal elements of the unit.

1-30 MHz Baluns BR-800-1(2.5/4/6/11/16)

Electrical specifications

VSWR diagram

BR-800